Albrecht AE125H Dokumentacja

1 AE 69 H Scanning Receiver Alan Electronics GmbH

10 4. Replace the cover. Notes: • Use only fresh batteries of the required size and recommended ty

11 Attaching the Belt Clip To make your scanner easier to carry when you are on the go, use the supplied belt clip. Use a Phi

12 antenna or outdoor base station antenna. Note: Always use 50-ohm, RG-58, or RG-8, coaxial cable to connect an outdoor antenna. If the antenna is o

13 A Look at the Keypad Your scanner's keys have various functions labeled on the key tops and below the

14 function on or off. 2/ 2 – Enters “2”. Func + – Selects the search direction. 3 3 – Enters “3”. 4 4 – Enters “4”. 5/Dly 5 – Enters

15 A Look at the Display The display has indicators that show the scanner's current operating status. The display information

16 Operation Turning the scanner on and setting squelch Note: Make sure the scanner's antenna is connected before you turn it on. • Turn Sque

17 Notes: • If you have not stored frequencies into any channels, the scanner does not scan. • If the scanner picks up unwanted partial, or very wea

18 5 Search Bands Band Plan 2 Frequency Range MHz Steps 1 84.0150 - 87.2550 20 kHz 2 144.0000 - 145.9875 12.5 kHz 3 156.0000 - 162.0

19 chain search hold mode. • Press Func + Pgm in chain search mode or chain search hold mode. The lowest blank channel appears. • Press E + Pgm to

2 AE69H Controls and Display Antenna (See “Connecting the Antenna” on Page 12) Headphone Jack Squelch Volume

20 scanner stops on the frequency during a search or a search hold. • The scanner stores the frequency in memory and automatically resumes the sear

21 • To lock out a channel, manually select the channel, then press Func + L/O. In the display L/O appears. Note: You can still manually select loc

22 Using the Display Backlight • To turn on the display light for easy viewing at night, press . The display lights for 15 seconds. • To tur

23 One or more channels might be locked out. Make sure the channels you want to scan are not locked out. The antenna might need to be adjusted. Chec

24 Cleaning • Switch off the unit and take out batteries before cleaning. • Clean the outside of the scanner with a mild detergent. • To prevent s

25 Specifications Channels:...80 Frequency Range (in MHz) : see Band Plans Channel Steps.

26 European 2 years warranty The distributor, dealer or retail shop warrants to the original retail purchaser of this product that should this produc

27 Optional Accessories Albrecht recommends to use following accessories. These are only examples, You will find our whole range of accessory items

28 CE-Declaration of Conformity CE Konformitätserklärung/ Declaration of Conformity Hiermit wird erklärt, dass unser Produkt / herewith we dec

3 Contents AE69H Controls and Display... 2 Introduction ... 4

4 CE-Declaration of Conformity ... 28 Introduction Thank you for purchasing an Albrecht AE69H handheld Scanner. The scan

5 This table lists the frequency ranges, default frequency step and type of transmissions you can hear for each range. The scanner has 3 Band Plans,

6 • Make sure the power is turned off. • While holding down 1, 2 or 3 key, turn on the scanner. Note: Please carry out a memory initialization (Res

7 About this Manual The screen displays used in this manual are representations of what might appear when you use your scanner. Since what you see dep

8 • Broadcast AM/FM/TV stations (not to be received with this scanner model) • Many other business radio users When you want to store a conventiona

9 Included with Your Scanner ・ Owner’s Manual ・ Scanner and Antenna ・ Belt Clip (with 2 screws) Note: If any of these items are missing