Albrecht AE69-2H Dokumentacja

1 AE69-2H Scanning Receiver

10 Cautions: • Use only fresh batteries of the required size and recommended type. • Always remove old or weak batteries.

11 about 14 hrs to bring them to a full charge. Do not connect any AC adapter to the scanner if non-rechargeable standard batteries are installed

12 Attaching the Belt Clip To make your scanner easier to carry when you are on the go, use the supplied belt clip. Use a Phillip

13 the scanner, use RG-213/U or “air cell” type low loss coaxial cable. You can get a BNC adapter at your local electronics store. Connecting an Earp

14 A Look at the Keypad Your scanner's keys have various functions labeled on the key tops and below the

15 2/ 2 – Enters “2”. Func + – Selects the search direction. 3 3 – Enters “3”. 4 4 – Enters “4”. 5/Dly 5 – Enters “5”. Func + Dly – S

16 A Look at the Display The display has indicators that show the scanner's current operating status. The display information

17 Operation Turning the scanner on and setting squelch Note: Make sure the scanner's antenna is connected before you turn it on. • Turn Sque

18 Notes: • If you have not stored frequencies into any channels, the scanner does not scan. • If the scanner picks up unwanted partial, or very wea

19 5 Search Bands Band Plan 2 Frequency Range MHz Steps 1 84.0150 - 87.2550 20 kHz 2 144.0000 - 145.9875 12.5 kHz 3 156.0000 - 162.0

2 AE69-2H Controls and Display Antenna (See “Connecting the Antenna” on Page 12) Headphone Jack Squelch Volume

20 chain search hold mode. • Press Func + Pgm in chain search mode or chain search hold mode. The lowest blank channel appears. • Press E + Pgm to

21 scanner stops on the frequency during a search or a search hold. • The scanner stores the frequency in memory and automatically resumes the sear

22 that have a continuous transmission. • To lock out a channel, manually select the channel, then press Func + L/O. In the display L/O appears. No

23 Using the Display Backlight • To turn on the display light for easy viewing at night, press . The display lights for 15 seconds. • To tur

24 The squelch might need to be adjusted. Adjust the squelch threshold. See“Turning On The Scanner and Setting Squelch”. One or more channels might be

25 noise, move it or its antenna away from the source of the noise. If possible, a higher elevation might provide better reception. • Also try changi

26 IF Frequencies 1st IF (25-173.995 MHz)……...380.6050-380.7000 MHz 1st IF (406-512 MHz) ...……...380.60625-380.7000 MHz 2nd IF ...

27 Where to find service hints and documentation The complete technical documentation is updated regularly. You can download the latest versions of u

28 CE-Declaration of Conformity CE Konformitätserklärung/ Declaration of Conformity Hiermit wird erklärt, dass unser Produkt / herewith we decl

3 Contents AE69-2H Controls and Display... 2 Introduction ... 4 Prec

4 Where to find service hints and documentation 27 Optional Accessories ... 27 CE-Declaration of Conformity ..

5 This table lists the frequency ranges, default frequency step and type of transmissions you can hear for each range. The scanner has 3 Band Plans,

6 • Make sure the power is turned off. • While holding down 1, 2 or 3 key, turn on the scanner. Note: Please carry out a memory initialization (Res

7 About this Manual The screen displays used in this manual are representations of what might appear when you use your scanner. Since what you see dep

8 • Broadcast AM/FM/TV stations (not to be received with this scanner model) • Many other business radio users When you want to store a conventiona

9 Included with Your Scanner ・ Owner’s Manual ・ Scanner and Antenna ・ Belt Clip (with 2 screws) Note: If any of these items are missing